FX50 AWD V8-5.0L (VK50VE) (2009)
Suspension Control Module: Service and Repair
Removal and Installation
E-SUS CONTROL UNIT
Removal and Installation
REMOVAL
1. Turn the ignition switch OFF.
2. Remove the luggage side finisher lower (LH). Refer to See: Body and Frame/Interior Moulding / Trim/Service and Repair/Luggage Floor
Trim/Exploded View.
3. Disconnect the E-SUS control unit connector.
4. Remove the E-SUS control unit mounting bolts.
5. Remove the E-SUS control unit from vehicle.
INSTALLATION
Install in the reverse order of removal.