FX50 AWD V8-5.0L (VK50VE) (2009)
Control Arm: Service and Repair
Upper Link
Exploded View
UPPER LINK
Exploded View
Removal and Installation
UPPER LINK
Removal and Installation
REMOVAL
1. Remove tires from with power tool.
2. Remove shock absorber. Refer to See: Suspension Spring ( Coil / Leaf )/Service and Repair/Front Coil Spring And Shock Absorber/Exploded
View.
3. Remove upper link and stopper arm bushing.
INSTALLATION
Note the following, and install in the reverse order of removal.
-
Perform final tightening of bolts and nuts at the vehicle installation position (rubber bushing), under unladen conditions with tires on level ground.