FX50 AWD V8-5.0L (VK50VE) (2009)
Ride Height Sensor: Service and Repair
Front Body Vertical G Sensor
Exploded View
FRONT BODY VERTICAL G SENSOR
Exploded View
NOTE:
The above figure shows left side. Right side is the mirror image.
Removal and Installation
FRONT BODY VERTICAL G SENSOR
Removal and Installation
REMOVAL
1. Turn the ignition switch OFF.
2. Remove the engine room covers (LH/RH). Refer to See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Cover/Exploded View.
3. Disconnect the front body vertical G sensor connector.
4. Remove the front body vertical G sensor mounting bolts.
5. Remove the front body vertical G sensor from vehicle.
INSTALLATION
Install in the reverse order of removal.