FX50 AWD V8-5.0L (VK50VE) (2009)
Tire Pressure Module: Service and Repair
Removal and Installation
TPMS CONTROL UNIT
Removal and Installation
REMOVAL
1. Remove the glove box assembly. Refer to See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Exploded View.
2. Remove the instrument lower panel RH. Refer to See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Exploded View.
3. Disconnect low tire pressure warning control unit connector.
4. Remove the low tire pressure warning control unit control unit.
INSTALLATION
Install in the reverse order of removal.
-
Perform ID registration after replacing low tire pressure warning control unit. Refer to See: Testing and Inspection/Programming and
Relearning/Transmitter ID Registration Procedure/Transmitter ID Registration Procedure.