infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

A/T - 7 Speed A/T, Fluid Level Checking/Filling|Page 3354 > < A/T - 7 Speed A/T, Fluid Level Checking/Filling|Page 3352
Page 3
background image

10. If fluid does not drip out connect the Transmission Fill Pump (Pump) at the overflow plug hole and pump in 0.5 liters of Nissan Matic S ATF (see

Figure 2).

NOTE:

Check to make sure fluid temperature is still within specified range.

11. Disconnect the pump's hose at the quick disconnect (see Figure 2).

^

At first an initial amount of fluid may come out. Do not be concerned.

^

If fluid comes out as a steady drip perform Step 9 to complete ATF level check.

^

If fluid still does not come out as a steady drip repeat Step 10 until it does.

Once a steady drip is obtained perform Step 9 to complete ATF level check.

Refill After Draining / Removing The Pan

1. With the pan and drain plug installed connect the Transmission Fill Pump at the overflow plug hole and then fill the pan with 3 liters (3-1/8 US

quarts 2-5/8 Imp. quarts) of Nissan Matic S ATF.

2. Perform Check ATF Level procedure starting with Step 2.

Disclaimer

A/T - 7 Speed A/T, Fluid Level Checking/Filling|Page 3354 > < A/T - 7 Speed A/T, Fluid Level Checking/Filling|Page 3352