FX50 AWD V8-5.0L (VK50VE) (2009)
2. Align the matching mark (A) of main shaft with the mark (B) of companion flange, then install the companion flange.
3. Using a flange wrench (A) (commercial service tool), install the self-lock nut of companion flange and tighten to the specified torque.
CAUTION:
Never reuse self-lock nut.
4. Install the rear propeller shaft. Refer to See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller Shaft/Service and Repair/Removal and
Replacement/Rear Propeller Shaft 3F-R-2Vl107/Exploded View.
5. Check fluid level.