G20 L4-2.0L (SR20DE) (1992)
![background image](/infiniti/g20/l4-2.0l_(sr20de)/Page-733001.png)
Tach Filter: Testing and Inspection
Fig. 216 Resistor Terminal Identification
1.
Disconnect resistor harness connector.
2.
Check resistance between terminals A and B, Fig. 216.
3.
Resistance should be 2200 ohms.
Tach Filter: Testing and Inspection
Fig. 216 Resistor Terminal Identification
1.
Disconnect resistor harness connector.
2.
Check resistance between terminals A and B, Fig. 216.
3.
Resistance should be 2200 ohms.