G20 L4-2.0L (SR20DE) (1992)
Throttle Position Sensor: Testing and Inspection
Component Testing Procedure
Fig. 210 Throttle Sensor Terminal Identification
1.
Disconnect throttle sensor harness connector.
2.
Measure resistance between terminals A and B, Fig. 210.
3.
Check resistance as follows:
a. Accelerator pedal completely released, resistance should be approximately 2000 ohms.
b. Accelerator pedal partially released, resistance should be 2000-10000 ohms.
c. Accelerator pedal completely depressed, resistance should be approximately 10000 ohms.