G35 Coupe V6-3.5L (VQ35DE) (2003)
10. Loosen bolts in reverse order of illustration, and remove the intake manifold collector cover, gasket, intake manifold collector (lower) and gasket
with power tool.
INSPECTION AFTER REMOVAL
Surface Distortion
^
Using straightedge and feeler gauge, inspect the surface distortion of both the intake manifold collector (upper) and (lower).
Limit: 0.1 mm (0.004 inch)
INSTALLATION
^
Install in the reverse order of removal paying attention to the following.
Indication of Part Installation Direction
^
Referring to front marks, install parts shown in figure.
Installation of Intake Manifold Collector (Lower)