G35 Coupe V6-3.5L (VQ35DE) (2003)
Condenser HVAC: Service and Repair
Condenser / REMOVAL
1. Remove engine cover, air cleaner assembly, air hose and air duct.
2. Use a refrigerant collecting equipment (for HFC-134a) to discharge the refrigerant.
3. Remove engine under cover, using power tools.
4. Drain engine coolant.
5. Remove radiator fan shroud with cooling fan after removing radiator upper hose.
6. Remove ambient sensor bracket after removing horn.
7. Disconnect one-touch joints.
a. Set a disconnector (condenser outlet: 92530-89908, condenser inlet: 92530-89912) on A/C piping.
b. Slide a disconnector upward until it clicks.
c. Slide A/C piping upward and disconnect it.
CAUTION: Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.
8. Remove mounting bolt for condenser.
9. Remove radiator upper mount, move radiator and condenser to the engine side.