infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

A/T - MIL ON/Incorrect Shifting/DTC's Set|Page 8603 > < A/T - MIL ON/Incorrect Shifting/DTC's Set
Page 2
background image

NOTE:

Reference the Tool Catalog Price List in ASIST. Pro-rate the individual connectors, terminals, retainers and/or seals used per this list, then multiply
that pro-rated amount by 40% (dealer mark-up) to arrive at the claimable amount for the repair component(s) actually used. On your warranty claim,
use Part Category 791 ("Body Electrical") to claim the derived amount.

CLAIMS INFORMATION

If only the connector is repaired or if the connector is repaired and the valve body is replaced (including Transmission Control Unit Reprogramming and
initialization), submit a Primary Failed Part (PP) line claim using the claims coding table.

Service Procedure

1.

Check the transmission fluid; confirm it is at the full level and is not burnt.

If the fluid is burnt, this bulletin does not apply. Use the Service Manual (ESM) to further diagnosis and repair the incident.

2.

Print the Freeze Frame data (if available) for stored DTC(s).

3.

Erase stored DTC(s).

A/T - MIL ON/Incorrect Shifting/DTC's Set|Page 8603 > < A/T - MIL ON/Incorrect Shifting/DTC's Set