G35 Coupe V6-3.5L (VQ35DE) (2003)
10. Install a tie-wrap (P/N 24216 - AM00A) around the SAB connector as shown in Figure 8a.
a. Route the tie-wrap between the wires.
b. Pull the tie-wrap tight.
c. Cut excess tie-wrap flush so there are no sharp edges.
NOTE:
Leave the connector undisturbed for 5 minutes while the epoxy cures.
11. Reinstall the connector mounting clip (see Figure 9a).
12. Install 2 "mounting clip type" tie-wraps as shown in Figure 9a.