G35 Sedan V6-3.5L (VQ35DE) (2004)
Back Window Glass Moulding / Trim: Service and Repair
REAR WINDOW MOLDING
Exploded View EI-32
Removal and Installation
REMOVAL
Remove rear window glass. Refer to "REAR WINDOW GLASS AND MOLDING".
NOTE: Apply a strip of protective tape along the contour of rear window glass (molding) to prevent paint surface from being damaged.
INSTALLATION
Refer to "REAR WINDOW GLASS AND MOLDING".
NOTE:
-
Clean adhesive portion of rear window glass and around circumference with white gasoline.
-
Apply dam rubber to upper and lower surfaces of glass.
-
Attach rear window molding to side face of glass.
-
Rear window molding should not overlap on the surface of rear window glass.