G35 Sedan V6-3.5L (VQ35DE) (2004)
Hazard Warning Switch: Service and Repair
HAZARD SWITCH
Removal and Installation (M/T)
REMOVAL
1. Remove console boot (M/T).
2. Remove connector.
3. Remove screws (5) and remove bracket from console boot (M/T).
4. Press pawl on reverse side and remove the hazard switch.
INSTALLATION
Install in the reverse order of removal.
Removal and Installation (A/T)
REMOVAL
1. Remove console finisher (A/T).
2. Remove connector.
3. Remove screws and remove ashtray assembly from console finisher (A/T).
4. Press pawl on reverse side and remove the hazard switch.
INSTALLATION
Install in the reverse order of removal.