G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
6. Remove a part of the rear door weatherstrip.
7. Remove the partition sash mounting bolts (lower) and screw (upper) to remove the sash.
8. Remove the glass mounting bolts, and remove the door glass.
9. Remove the partition glass from the panel.
Installation
Install in the reverse order of removal.
REGULATOR ASSEMBLY
Removal
1. Remove the rear door finisher. Refer to "DOOR FINISHER".
2. Remove the rear door out side molding.
3. Remove the rear door speaker. Refer to "Removal and Installation of Door Speaker".
4. Remove the sealing screen.
5. Operate the power window switch to raise/lower the door window until the glass mounting bolts can be seen.