G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
Parking Brake Shoe: Service and Repair
Removal and Installation
PARKING BRAKE SHOE
Removal and Installation
REMOVAL
CAUTION:
^
Clean brakes with a vacuum dust collector to minimize a hazard of airborne particles or other materials.
^
When removing rear disc rotor, put matching marks on both rear disc rotor and wheel hub.
Be careful of the following:
^
Remove wheel, and remove disc rotor with parking brake pedal/lever completely returned.
^
If disc rotor cannot be removed, remove as follows.
1. Secure disc rotor in place with wheel nut.
2. Remove adjuster hole plug.
3. Insert flat-bladed screwdriver through adjuster hole. Turn adjuster to make clearance between brake shoe and drum.