G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
Radiator: Service and Repair
Removal and Installation
RADIATOR
Removal and Installation
WARNING: Do not remove radiator cap when engine is hot. Serious burns could occur from high-pressure engine coolant escaping from
radiator.
REMOVAL
1. Remove engine cover with power tool. Refer to "INTAKE MANIFOLD COLLECTOR".
2. Remove undercover with power tool.
3. Drain engine coolant from radiator. Refer to "Changing Engine Coolant".
CAUTION: Perform when the engine is cold.
4. Disconnect A/T fluid cooler hoses. (A/T models). Install blind plug to avoid leakage of A/T fluid.
5. Remove air duct (inlet) and air cleaner case. Refer to "AIR CLEANER AND AIR DUCT".
6. Remove bracket mounting bolt for anchoring A/C piping from vehicle left side, so that A/C piping can be moved.
7. Remove reservoir tank and bracket.
8. Remove radiator hoses (upper and lower) and reservoir tank hose.
CAUTION: Be careful not to allow engine coolant to contact drive belts.
9. Remove radiator cooling fan assembly. Refer to "COOLING FAN".