G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
^
Follow your identification marks made during removal, or follow the identification marks that are present on new camshafts for proper
placement and direction.
^
Install camshaft so that dowel pin hole and dowel pin on front end face are positioned as shown in the figure. (No. 1 cylinder TDC on its
compression stroke)
NOTE: Large-and small-pin holes are located on front end face of camshaft (INT), at intervals of 180 degrees. Face small dia. side pin hole
upward (in cylinder head upper face direction).
4. Install camshaft brackets.
^
Remove foreign material completely from camshaft bracket backside and from cylinder head installation face.
^
Install camshaft bracket in original position and direction as shown in the figure.