G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
4. Position center pulley puller on the end of the driveshaft, and remove pulley assembly using any commercially available pulley puller.
To prevent pulley groove from being deformed, puller claws should be positioned into edge of pulley assembly.
5. Remove field coil harness clip using a pair of pliers.
6. Remove snap ring using external snap ring pliers.
Inspection
Clutch disc
If contact surface shows signs of damage due to excessive heat, replace clutch disc and pulley.
Pulley
Check appearance of pulley assembly. If contact surface of pulley shows signs of excessive grooving, replace clutch disc and pulley. Contact surfaces of
pulley assembly should be cleaned with a suitable solvent before reinstallation.