G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
Receiver Dryer: Service and Repair
Removal and Installation of Liquid Tank
REMOVAL
1. Use a refrigerant collecting equipment (for HFC-134a) to discharge the refrigerant.
2. Remove front grille and horn (right side). Refer to "FRONT GRILLE".
3. Clean liquid tank and its surrounding area, and remove dirt and rust from tank.
CAUTION: Be sure to clean carefully.
4. Remove ambient sensor bracket after removing horn.
5. Remove mounting bolt from liquid tank.
6. Lift liquid tank upward. Remove bracket from protruding part of condenser.
7. Slide liquid tank upward, and then remove liquid tank.