infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Information Bus|Flow of Diagnosis|Page 5960 > < Information Bus|Flow of Diagnosis|Page 5958
Page 9
background image

NOTE:
-

For "ENGINE", "CAN COMM CIRCUIT [U1001]" are displayed. Put a check mark to it.

-

For "A/T", "NO DTC IS DETECTED" is displayed. Do not put a check mark to it.

-

For "ALL MODE AWD/4WD", "NO DTC IS DETECTED" is displayed. Do not put a check mark to it.

-

For "BCM", "NO DTC IS DETECTED" is displayed. Do not put a check mark to it.

-

For "ABS", "NO DTC IS DETECTED" is displayed. Do not put a check mark to it.

-

For "IPDM E/R", "CAN COMM CIRCUIT [U1000]" is displayed. Put a check mark to it.

NOTE:  There is a case that some of "CAN DIAG SUPPORT MNTR" and "SELF-DIAG RESULTS" are not needed for diagnosis. In the case,
"UNKWN" and "CAN COMM CIRCUIT(U1000)" in "Check sheet results (example)" change to "-". Then, ignore check marks on the Check
sheet table.

2. For the selected possible causes, it is expected that malfunctions have been found in the past.

Information Bus|Flow of Diagnosis|Page 5960 > < Information Bus|Flow of Diagnosis|Page 5958