G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
Accelerator Pedal Position Sensor: Testing and Inspection
Component Inspection
ACCELERATOR PEDAL POSITION SENSOR
1. Reconnect all harness connectors disconnected.
2. Turn ignition switch ON.
3. Check voltage between ECM terminals 106 (APP sensor 1 signal), 98 (APP sensor 2 signal) and ground under the given conditions.
4. If NG, replace accelerator pedal assembly and go to next step.
5. Perform EC-88, "Accelerator Pedal Released Position Learning". See: Computers and Control Systems/Testing and Inspection/Programming and
Relearning/Accelerator Pedal Released Position Learning
6. Perform EC-88, "Throttle Valve Closed Position Learning". See: Computers and Control Systems/Testing and Inspection/Programming and
Relearning/Throttle Valve Closed Position Learning
7. Perform EC-89, "Idle Air Volume Learning". See: Computers and Control Systems/Testing and Inspection/Programming and Relearning/Idle Air
Volume Learning