G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
5.
Click on Continue and follow directions to perform data transfer (download) from ASIST into CONSULT-II.
Step Two: Preparation for Reprogramming ECM
1.
Connect a battery charger to the vehicle's battery. Set the charger to a low charge rate (trickle charge).
CAUTION:
For number 2 below and number 3, DO NOT connect the CONSULT-II A/C Power Supply.
2.
Press [SUB MODE] (see Figure C) then:
a.
From the listed items find and select [BATTERY CHARGE].