G35x Sedan AWD V6-3.5L (VQ35HR) (2007)
Turn Signal Lamp: Service and Repair
REAR COMBINATION LAMP
Exploded View EXL-198
Exploded View
Removal and Installation
CAUTION: Disconnect the battery negative terminal or the fuse.
REMOVAL
1. Remove trunk side finisher.
2. Disconnect rear combination lamp connector.
3. Remove rear combination lamp mounting nuts.
4. Pull the rear combination lamp toward rear of the vehicle. Remove the rear combination lamp.
INSTALLATION
Install in the reverse order of removal.
Replacement
REAR TURN SIGNAL LAMP BULB
CAUTION: Disconnect the battery negative terminal or the fuse.
1. Remove trunk side finisher.
2. Turn the rear turn signal lamp bulb socket (1) counterclockwise and unlock it.
3. Remove the bulb (2) from the socket.