G37 Coupe V6-3.7L (VQ37VHR) (2008)
8. Pull the bumper fascia side toward the vehicle side to disengage the fitting of bumper side bracket and bumper fascia side.
9. Remove bumper fascia assembly.
CAUTION: When removing bumper fascia, 2 workers are required so as to prevent it from dropping.
10. Remove the following parts after removing bumper fascia.
-
License plate lamp.
-
License lamp bracket.
-
License plate bracket.
-
Bumper lower retainer.
11. Remove bumper energy absorber.
12. Remove license lamp harness clamps of bumper reinforcement.
13. Remove bumper reinforcement mounting nuts and bolts, and then remove bumper reinforcement with power tool.
INSTALLATION
Install in the reverse order of removal.
NOTE: After installing, perform fitting adjustment.