G37 Coupe V6-3.7L (VQ37VHR) (2008)
Power Seat Switch: Service and Repair
Side Support Switch
SIDE SUPPORT SWITCH
Removal and Installation
REMOVAL
CAUTION: When removing and installing, use shop cloths to protect parts from damage.
1. Remove seat cushion outer finisher (1).
2. Remove screws (A).
3. Remove side support switch (2) from seat cushion outer finisher.
INSTALLATION
Install in the reverse order of removal.
CAUTION: Be sure to clamp the harness to the right place.
NOTE: After installing the driver seat, perform additional service when removing battery negative terminal. Refer to SE-7, "ADDITIONAL SERVICE
WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special Repair Requirement". See: Testing and Inspection