G37 Coupe V6-3.7L (VQ37VHR) (2008)
Fuel Gauge Sender: Service and Repair
Disassembly and Assembly
DISASSEMBLY AND ASSEMBLY
FUEL LEVEL SENSOR UNIT, FUEL FILTER AND FUEL PUMP ASSEMBLY
Exploded View
FL-13 Exploded View
Disassembly
CAUTION: Sub fuel level sensor unit cannot be disassembled and should be replaced as a unit.
Remove fuel level sensor unit as follows:
1. Disconnect harness connector (A).
-
Hold connector by fingers and pull it out, because there is no stopper release tab.
2. Using suitable tool, pull up tabs points as shown in the figure (two points) to release the lock.
1: Fuel level sensor unit
A: Pull up tabs
CAUTION: Be careful not to damage it.