G37 Coupe V6-3.7L (VQ37VHR) (2008)
^
The approximate amount is illustrated in Figure 2.
^
Molykote M77 grease is listed in the Parts Information.
3.
Clean the flange surface of the outer joint of the driveshaft.
4.
Apply exactly 1.2 - 4.0g of Molykote M77 grease to the entire flat surface of the outer joint on the driveshaft.
IMPORTANT:
The amount of grease used is critical for success of the repair. Do not use too much or too little.
^
Cover the width shown in "A" above.