G37 Coupe V6-3.7L (VQ37VHR) (2008)
Wheel Fastener: Specifications
Wheel Fastener
(for 18 inch wheel models)
^
Follow the maintenance schedule for tire rotation service intervals.
^
When installing the wheel, tighten wheel nuts to the specified torque.
CAUTION:
^
Do not include the T-type spare tire when rotating the tires.
^
When installing wheels, tighten them diagonally by dividing the work two to three times in order to prevent the wheels from developing any
distortion.
^
Be careful not to tighten wheel nut at torque exceeding the criteria for preventing strain of disc rotor.
^
Use NISSAN genuine wheel nuts for aluminum wheels.
Wheel nuts tightening torque: Refer to WT-98, "Road Wheel". See: Wheels/Specifications
^
Perform the ID registration, after tire rotation. Refer to WT-5, "ID REGISTRATION PROCEDURE: Special Repair Requirement". See: Tire
Monitoring System/Testing and Inspection/Programming and Relearning/Transmitter ID Registration Procedure
(for 19 inch wheel models)
^
Tire cannot be rotated in vehicle, as front tire are different size from rear tire and the direction of wheel rotation is fixed in each tire.
Wheel nuts tightening torque: Refer to WT-98, "Road Wheel". See: Wheels/Specifications
CAUTION:
^
Do not include the T-type spare tire when rotating the tires.
^
Use NISSAN genuine wheel nuts for aluminum wheels.