G37 Coupe V6-3.7L (VQ37VHR) (2008)
Main and Sub Fuel Level Sensor Unit
-
Face main and sub fuel level sensor units as shown in the figure, and install them with the knock pin (C) on back aligned with pin hole on fuel
tank.
-
Install retainer so that its notch becomes parallel with the notch on fuel tank.
-
Tighten retainer mounting bolts evenly.
Quick Connector
-
Connect quick connector as follows:
1. Check the connection for damage or any foreign materials.
2. Align the connector with the tube, then insert the connector straight into the tube until a click sound is heard.
3. After connecting, check that the connection is secure by following method.
-
Pull the tube and the connector to check they are securely connected.
A : Pull
-
Visually confirm that the two retainer tabs are connected to the connector.
Inspection