G37 Coupe V6-3.7L (VQ37VHR) (2008)
3. If this bulletin applies and you have performed ECM reprogramming, the screen in Figure 2 displays when the reprogramming is completed.
4. Make sure to erase DTCs from all Systems.
NOTE:
During the reprogramming, DTCs will set in several systems and must be erased.
5. Test drive the vehicle and make sure it operates correctly and the Check Engine light is OFF.
^ If the Check Engine light comes ON; diagnose, perform repairs, and erase DTCs.
^ Diagnosis and repairs beyond the ECM reprogramming are not covered by this bulletin.