G37 Coupe V6-3.7L (VQ37VHR) (2008)
Power Seat Control Module: Service and Repair
Driver Seat Control Unit
DRIVER SEAT CONTROL UNIT
Removal and Installation
REMOVAL
CAUTION: When removing and installing, use shop cloths to protect parts from damage.
1. Remove driver seat (1).
2. Remove mounting bolts (A).
3. Remove driver seat control unit (2).
INSTALLATION
Install in the reverse order of removal.
CAUTION: Be sure to clump the harness to the right place.
NOTE: After installing the driver seat, perform additional service when replacing control unit. Refer to See: Body and Frame/Seats/Testing and
Inspection/Programming and Relearning