G37 Coupe V6-3.7L (VQ37VHR) (2008)
Power Seat Switch: Service and Repair
Power Seat Switch
POWER SEAT SWITCH
Removal and Installation
REMOVAL
CAUTION: When removing and installing, use shop cloths to protect parts from damage.
NOTE: The same procedure is also performed for driver side and passenger side.
1. Remove the seat cushion outer finisher (1).
2. Remove the screws (A).
3. Remove the power seat switch (2) from the seat cushion outer finisher (1).
INSTALLATION
Install in the reverse order of removal.
CAUTION: Be sure to clamp the harness to the right place.
NOTE: After installing the driver seat or passenger side, perform additional service when removing battery negative terminal. Refer to SE-7,
"ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special Repair Requirement". See: Body and
Frame/Seats/Testing and Inspection