infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Crash Zone Sensor|Page 964 > < Crash Zone Sensor
Page 1
background image

Impact Sensor: Service and Repair
Side Air Bag (Satellite) Sensor

SIDE AIR BAG (SATELLITE) SENSOR

Exploded View

SR-15 Exploded View

Removal and Installation

WARNING:

-

Before servicing, turn ignition switch OFF, disconnect both battery terminals and wait at least 3 minutes.

-

Do not use air tools or electric tools for servicing.

REMOVAL

1. Remove the front seat belt.
2. Remove the satellite sensor fixing nuts.
3. Disconnect harness connector and then remove satellite sensor.

CAUTION:
-

Do not use old fixing nuts after removal; replace with new nuts.

-

Replace the satellite sensor if it has been dropped or sustained an impact.

-

Replace the satellite sensor of deployed SRS front side air bag module and deployed SRS side curtain air bag module.

INSTALLATION

Install in the reverse order of removal.

CAUTION:

-

Do not damage the harness while installing.

-

In the case that a malfunction is detected by the air bag warning lamp, reset by the self-diagnosis function and delete the memory by
CONSULT-III.

-

In the case that a malfunction is still detected after the above operation, perform self-diagnosis to repair malfunctions.

-

After the work is completed, check that no system malfunction is detected by air bag warning lamp. Refer to SRC-15, "Diagnosis

Crash Zone Sensor|Page 964 > < Crash Zone Sensor