G37 Coupe V6-3.7L (VQ37VHR) (2008)
5. Install dowel pin (1) into dowel pin hole (A), and install cam ring (2) pointing it's D1 side toward the body assembly (3) side as shown in the
figure.
CAUTION:
^
When installing the cam-ring, turn carved face with a letter "E" (B) of it to the rear cover.
^
Never confuse the assembling direction of the cam ring. If cam ring is installed facing the incorrect direction, it may cause pump
operation malfunction.
6. Install rotor to body assembly.
CAUTION:
When installing the rotor, turn punch mark face on rotor to body assembly.
7. Install vane to rotor so that arc of vane faces cam ring side.
8. Check if drive shaft assembly turns smoothly
9. Install gasket to body assembly.
CAUTION: