G37 Coupe V6-3.7L (VQ37VHR) (2008)
10. Remove drive pinion lock nut using the flange wrench.
11. Remove companion flange using pullers.
12. Remove front oil seal using the puller (A) [SST: KV381054S0 (J-34286)].
INSTALLATION
1. Apply multi-purpose grease to front oil seal lips.
2. Install front oil seal using the drift (A) [SST: ST30720000 (J-25405)] as shown in figure.
CAUTION:
^
Never reuse oil seal.
^
Never incline oil seal when installing.