G37x Coupe AWD V6-3.7L (VQ37VHR) (2009)
Rear Shelf: Service and Repair
Removal And Installation
REAR PARCEL SHELF FINISHER
Removal and Installation
REMOVAL
1. Remove trunk front finisher upper (without REAR SPOILER). Refer to See: Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior
Trim Panel/Service and Repair/Trunk Room Trim/Removal And Installation.
2. Disconnect high-mounted stop lamp harness connector (A).
(without REAR SPOILER)
3. Remove rear seat cushion and rear seatback. Refer to See: Seats/Service and Repair/Rear Seat/Removal and Installation.
4. Remove rear side finisher and rear pillar finisher. Refer to See: Trim Panel/Service and Repair/Body Side Trim.
5. Remove rear parcel shelf finisher mounting clips (A).
6. Remove rear seat striker cover fixing pawls, and then remove rear seat striker cover.
7. Pull rear parcel shelf finisher, and then remove rear parcel shelf finisher.
8. Remove the following parts after removing rear parcel shelf finisher.
-
Child anchor cover.
-
Rear speaker grille.
-
High-mounted stop lamp (without REAR SPOILER). Refer to See: Lighting and Horns/Center Mounted Brake Lamp/Service and Repair/Without
Rear Spoiler/Removal And Installation.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Check that clips are securely fitted in panel holes on body when installing, and then press them in.