G37x Coupe AWD V6-3.7L (VQ37VHR) (2009)
Brake Pad: Removal and Replacement
Exploded View
FRONT DISC BRAKE
BRAKE PAD (1 PISTON TYPE) BRAKE PAD (1 PISTON TYPE) : Exploded View
Removal And Installation
FRONT DISC BRAKE
BRAKE PAD (1 PISTON TYPE) : Removal and Installation
REMOVAL
WARNING:
Clean any dust from the brake caliper and brake pads with a vacuum dust collector. Never blow with compressed air.
CAUTION:
-
Never depress the brake pedal while removing the brake pads because the piston may pop out.
-
Never spill or splash brake fluid on the disc rotor.
1. Remove tires with power tool.
2. Remove the protector and location pin.
3. Suspend the cylinder body with suitable wire so that the brake hose will not stretch. Then remove the pad return springs and brake pads from the
torque member.
CAUTION:
-
Never deform the pad return spring when removing the pad return spring.
-
Never deform the pad retainers when removing the pad retainers from the torque member.
-
Never damage the piston boot.
-
Never remove the shims from the brake pads.
-
Never drop the brake pads.
INSTALLATION