G37x Coupe AWD V6-3.7L (VQ37VHR) (2009)
Vacuum Brake Booster: Service and Repair
Brake Booster Pressure Sensor
Exploded View
BRAKE BOOSTER PRESSURE SENSOR
Exploded View
Removal And Installation
BRAKE BOOSTER PRESSURE SENSOR
Removal and Installation
REMOVAL
1. Remove master cylinder cover.
2. Remove brake booster pressure sensor.
3. Remove vacuum hose.
INSTALLATION
Note the following, installation is the reverse order of removal.
-
When installing vacuum hose, insert it until its tip reaches the back-end of length (A) or further as shown in the figure.
Standard
A : 25 mm (0.98 in) or more