G37x Coupe AWD V6-3.7L (VQ37VHR) (2009)
d. Tighten the bolt 90 degrees (one mark) (b).
-
Place a matching mark (A) on crankshaft pulley (2) aligning with the matching (C) of crankshaft pulley bolt (1).
e. Rotate crankshaft pulley in normal direction (clockwise when viewed from front) to confirm it turns smoothly.
14. Install power steering oil pump bracket and idler pulley bracket as follows:
a. Tighten mounting bolts in numerical order as shown in the figure. (temporarily)
b. Tighten mounting bolts to specified torque in numerical order as shown in the figure.
15. For the following operations, perform steps in the reverse order of removal.