G37x Coupe AWD V6-3.7L (VQ37VHR) (2009)
INSTALLATION
-
Install oil pressure switch as follows:
- Remove old liquid gasket adhering to oil filter bracket.
- Apply liquid gasket and install oil pressure switch.
Use Genuine RTV Silicone Sealant or equivalent. Refer to See: Specifications/Fluid Type Specifications/Recommended Chemical Products
and Sealants.
Inspection
OIL FILTER BRACKET (AWD)
Inspection
INSPECTION AFTER INSTALLATION
1. Check the engine oil level and add engine oil. Refer to See: Fluids/Engine Oil/Testing and Inspection.
2. Start the engine, and check there is no leakage of engine oil.
3. Stop the engine and wait for 10 minutes.
4. Check the engine oil level again. Refer to See: Fluids/Engine Oil/Testing and Inspection.