infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Front Final Drive F160A|Page 1220 > < Front Final Drive F160A|Page 1218
Page 1
background image

Fluid - Differential: Service and Repair
Rear Final Drive R200

Inspection

REAR DIFFERENTIAL GEAR OIL

Inspection

OIL LEAKAGE
Make sure that oil is not leaking from final drive assembly or around it.

OIL LEVEL
-

Remove filler plug (1) and check oil level from filler plug mounting hole as shown in the figure.

CAUTION:
Never start engine while checking oil level.
-

Set a gasket on filler plug (1) and install it on final drive assembly. Refer to See: Transmission and Drivetrain/Differential Assembly/Service and
Repair/Overhaul/Rear Final Drive R200/Exploded View (2WD), See: Transmission and Drivetrain/Differential Assembly/Service and
Repair/Overhaul/Rear Final Drive R200/Exploded View(AWD).

CAUTION:
Never reuse gasket.

Draining

REAR DIFFERENTIAL GEAR OIL

Draining

1. Stop the engine.

2. Remove drain plug (1) and drain gear oil.
3. Set a gasket on drain plug (1) and install it to final drive assembly and tighten to the specified torque. Refer to See: Transmission and

Drivetrain/Differential Assembly/Service and Repair/Overhaul/Rear Final Drive R200/Exploded View, "2WD

 See: Transmission and Drivetrain/Differential Assembly/Service and Repair/Overhaul/Rear Final Drive R200/Exploded View(AWD).

CAUTION:
Never reuse gasket.

Refilling

Front Final Drive F160A|Page 1220 > < Front Final Drive F160A|Page 1218