G37x Coupe AWD V6-3.7L (VQ37VHR) (2009)
3. Disconnect heated oxygen sensor 2 connectors (A).
4. Remove heated oxygen sensor 2 harness (B) from clips (1).
5. Remove bracket (2) from A/T assembly. Refer to See: Service and Repair/Removal and Replacement/Transmission Assembly/Exploded View
See: Service and Repair/Removal and Replacement/Transmission Assembly/Removal And Installation, "2WD
See: Service and Repair/Removal and Replacement/Transmission Assembly/Exploded View(AWD).
6. Remove clips (1).
7. Remove oil pan (2) and oil pan gasket.
8. Remove magnets from oil pan.
INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION:
-
Never reuse drain plug and drain plug gasket.
-
Clean foreign materials (gear wear particles) that adhere on the inside of the oil pan and on the magnet, and then assembly.
-
Refer to the followings when installing oil pan (2) (with oil pan gasket) and clips (1) to transmission case.
CAUTION: