infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Front Final Drive F160A|Page 3652 > < Front Final Drive F160A|Page 3650
Page 11
background image

and pinion bearing and malfunction of pinion bearing. Check for these items and repair if necessary.

c. If the runout value is still outside of the limit after the check and repair, replace companion flange.

11. Make a stamping for identification of front oil seal replacement frequency. Refer to "Identification stamp of replacement frequency of front oil

seal".

CAUTION:
Make a stamping after replacing front oil seal.

12. Install propeller shaft. Refer to See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller Shaft/Service and Repair/Removal and

Replacement/Rear Propeller Shaft 3S80A/Exploded View.

13. Install side flange with the following procedure.

a. Attach the protector [SST: KV38107900 (J-39352)] to side oil seal.
b. After the side flange is inserted and the serrated part of side gear has engaged the serrated part of flange, remove the protector.
c. Put a suitable drift on the center of side flange, then drive it until sound changes.

NOTE:
When installation is completed, driving sound of the side flange turns into a sound that seems to affect the whole final drive.

d. Confirm that the dimension of the side flange (1) installation

(Measurement A) in the figure comes into the following.

Measurement "A" : 326 - 328 mm (12.83 - 12.91 in)

14. Install drive shaft. Refer to See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Removal and Replacement/Rear Drive

Shaft/Exploded View.

15. Install rear wheel sensor. Refer to See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Wheel Speed Sensor/Service and

Repair/Wheel Sensor/Exploded View.

16. Install center muffler. Refer to See: Engine, Cooling and Exhaust/Exhaust System/Service and Repair/Exploded View.
17. Refill gear oil to the final drive and check oil level. Refer to See: Service and Repair/Procedures/Rear Final Drive R200V/Refilling.
18. Check the final drive for oil leakage. Refer to See: Service and Repair/Procedures/Rear Final Drive R200V/Inspection.

Exploded View

FRONT OIL SEAL

A/T A/T : Exploded View

Front Final Drive F160A|Page 3652 > < Front Final Drive F160A|Page 3650