I30 V6-2988cc 3.0L DOHC MFI (VQ30DE) (1997)
/Page-1504001.png)
Technical Service Bulletin # 98-021
Date: 980601
A/T - Remanufactured Unit Solenoid Valve Assembly Info.
Classification:
AT98-004
Reference:
ITB98-021
Date:
June 1, 1998
REMANUFACTURED AUTOMATIC TRANSAXLE SOLENOID VALVE ASSEMBLY REPLACEMENT PROCEDURE
APPLIED VEHICLE:
I30 (CA32)
APPLIED TRANSMISSION # :
310CM-80X17RE
SERVICE INFORMATION
Infiniti has developed a new solenoid valve assembly to improve transaxle durability. This new solenoid valve has been incorporated into original
equipment and new production service part transaxies. To ensure remanufactured F04 transaxles incorporate this new solenoid valve, some
remanufactured transaxle assemblies require replacement of the solenoid valve assembly with the new part.
Only the remanufactured transaxles listed in the Applied Transmissions (above) require replacement of the solenoid valve assembly. These parts will
have tags placed on the shipping container indicating replacement of the solenoid valve assembly is required.
Failure to perform the solenoid valve assembly repair may result in slipping and improper operation.
When installing one of the replacement transaxle assemblies listed above, use the following service procedure to replace the solenoid valve assembly.
This bulletin contains the repair procedure, warranty and parts information.
PARTS INFORMATION
CLAIMS INFORMATION
