infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

ABOUT US
Planetary Gears, A/T > < Output Shaft, A/T|Specifications|Page 8206

I30 V6-2988cc 3.0L DOHC MFI (VQ30DE) (1997)

Page 5
background image

6. Press needle bearing on bearing retainer.

7. Install snap ring to bearing retainer.

8. After packing ring grooves with petroleum jelly, carefully install new seal rings on output shaft and bearing retainer.

NOTE:  Roll paper around seal rings to prevent seal rings from spreading.

Planetary Gears, A/T > < Output Shaft, A/T|Specifications|Page 8206