I30t V6-2988cc 3.0L DOHC MFI (VQ30DE) (1997)
Oil Pick Up/Strainer: Service and Repair
Installation
1. Install aluminum oil pan.
a. Use a scraper to remove all traces of liquid gasket from mating surfaces. Also, remove traces of liquid gasket from mating surface of cylinder
block, front cover and steel oil pan. Remove old liquid gasket from the bolt holes and threads.
b. Apply sealant to front cover gasket and rear oil seal retainer gasket.
c. Apply a continuous bead of liquid gasket to the mating surface of aluminum oil pan.
-
Use Genuine Liquid Gasket, or equivalent.