I30t V6-2988cc 3.0L DOHC MFI (VQ30DE) (1997)
Input Shaft: Service and Repair
DISASSEMBLY
1. Before disassembly, check 3rd, 4th and 5th input gear end plays. If not within specification, disassemble and check contact surface of gear, shaft
and hub. Check clearance of snap ring groove. Refer to Assembly.
2. Remove input shaft rear bearing with Tool.
3. Remove 5th & reverse synchronizer and 5th input gear with Tool.
4. Remove thrust washer ring, thrust washers and 4th input gear.