J30 V6-2960cc 3.0L DOHC (VG30DE) (1995)
Timing Belt: Service and Repair
TIMING BELT REPLACEMENT
CAUTION:
-
Do not bend or twist timing belt.
-
After removing timing belt, do not turn crankshaft and camshaft separately because valves will strike piston heads.
-
Make sure that timing belt, camshaft sprocket, crankshaft sprocket. idler pulley and auto-tensioner are clean and free of oil and water.
-
Timing belt installation should be carried out when engine is cold.
REMOVAL
1. Remove engine under cover.
2. Drain coolant from both cylinder block drain plugs, and radiator drain cock.