J30 V6-2960cc 3.0L DOHC (VG30DE) (1995)
Inhibitor Switch: Testing and Inspection
1. Check continuity between terminals "1" and "2" and between terminals "3" and "4", "5", "6", "7", "8", "9" while moving selector lever through
each range.
CONTINUITY CHART
2. If NG, check again with manual control linkage disconnected from manual shaft of A/T assembly. - Refer to step 1.
3. If OK on step 2, adjust manual control linkage. - Refer to "ON-VEHICLE SERVICE".